[Oisf-devel] suricata on solaris?
Luis
luis.mlists at gmail.com
Mon May 24 11:48:06 EDT 2010
Hi:
Thanks for answering..
made the modifications to configure.in, and the mentioned source files..
(using DOS_SOLARIS)
however, I'm running into the following now..
bash-3.00$ make
make all-recursive
Making all in libhtp
make all-recursive
Making all in htp
Making all in test
Making all in src
gcc -DHAVE_CONFIG_H -I. -I.. -I../libhtp -I/opt/PP2K/include
-I/opt/PP2K/include -I/opt/PP2K/include -I/opt/PP2K/include
-mcpu=ultrasparc -W -Wall -fno-strict-aliasing -Wno-unused-parameter
-DOS_SOLARIS -DHAVE_LIBNET11 -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD
-DHAVE_NET_ETHERNET_H -DLIBPCAP_VERSION_MAJOR=1 -MT flow.o -MD -MP -MF
.deps/flow.Tpo -c -o flow.o flow.c
flow.c: In function `FlowManagerThread':
flow.c:666: error: `THREAD_NAME_LEN' undeclared (first use in this function)
flow.c:666: error: (Each undeclared identifier is reported only once
flow.c:666: error: for each function it appears in.)
flow.c:666: warning: implicit declaration of function `prctl'
flow.c:666: error: `PR_SET_NAME' undeclared (first use in this function)
flow.c:666: warning: unused variable `tname'
*** Error code 1
make: Fatal error: Command failed for target `flow.o'
Current working directory
/export/home/lcatacor/src/suricata/suricata-0.9.0/src
*** Error code 1
The following command caused the error:
fail= failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='libhtp src'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /export/home/lcatacor/src/suricata/suricata-0.9.0
*** Error code 1
make: Fatal error: Command failed for target `all'
did I miss something?
Thanks
Luis
On Sat, May 22, 2010 at 5:28 AM, Victor Julien <victor at inliniac.net> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Thank you Yoa-Min. One remark: in recent Suricata libnet is no longer
> required.
>
> Cheers,
> Victor
>
> Yao-Min Chen wrote:
> > The following info is dated back in Feb. So perhaps it is outdated. The
> > work was based on Solaris 10, but should also work with OpenSolaris.
> > Feel free to let me know any question.
> >
> >
> > LIBNET
> >
> > * Suricata requires libnet-1.1.x.so; the package available at
> > www.sunfreeware.com has libnet.a only.
> > * Instead, download libnet tarball from www.sunfreeware.com
> > * /usr/sfw/bin/gtar xzf libnet-1.1.2.1.tar.gz
> > * Get the patch files from D.Mehra's OpenSolaris package and build
> >
> > wget
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/libnet_link_dlpi.c.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/libnet_link_dlpi.c.patch>
> > wget
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.am.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.am.patch>
> > wget
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.in.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.in.patch>
> > patch -b -d src libnet_link_dlpi.c < libnet_link_dlpi.c.patch
> > patch -b -d src Makefile.am < makefile.am.patch
> > patch -b -p1 -d src Makefile.in < makefile.in.patch
> >
> > export CFLAGS="-g -fPIC"
> > export PATH=/opt/gccfss/bin:$PATH
> > ./configure
> > gmake
> > gmake install
> >
> >
> > Modify configure.in and configure to add a new OS label SUNOS
> >
> > case "$host" in
> > *-*-*freebsd*)
> > CFLAGS="${CFLAGS} -DOS_FREEBSD"
> > CPPFLAGS="${CPPFLAGS} -I/usr/local/include
> -I/usr/local/include/libnet11"
> > LDFLAGS="${LDFLAGS} -L/usr/local/lib
> -L/usr/local/lib/libnet11"
> > ;;
> > *darwin*|*Darwin*)
> > CFLAGS="${CFLAGS} -DOS_DARWIN"
> > CPPFLAGS="${CPPFLAGS} -I/opt/local/include"
> > LDFLAGS="${LDFLAGS} -L/opt/local/lib"
> > ;;
> > *SunOS*)
> > CFLAGS="${CFLAGS} -DOS_SUNOS"
> > CPPLAGS="${CPPFLAGS} -I/usr/sfw/include"
> > LDFLAGS="${LDFLAGS} -L/usr/sfw/lib"
> > ;;
> > *-*-linux*)
> > #for now do nothing
> > ;;
> > *)
> >
> >
> > Modify src
> >
> > * cd ./src
> > * source-pcap-file.c: replace u_int8_t with uint8_t as u_int8_t is
> > only defined in linux kernel header file, not POSIX standard
> > * util-debug.c: #define LOG_AUTHPRIV to LOG_AUTH and LOG_FTP to
> > LOG_DAEMON since there is neither LOG_AUTHPRIV nor LOG_FTP in
> Solaris
> > * stream-tcp.c: same as previous item, replace u_int8_t with uint8_t
> > as u_int8_t
> > * suricata-common.h: include <strings.h> to pick up definition of
> > index()
> > * tm-threads.c: replace syscall(SYS_gettid) with pthread_self();
> > replace sched_setaffinity() with processor_bind()
> > * util-debug.c: replace syscall(SYS_gettid) with pthread_self()
> > * util-debug-filters.c: replace syscall(SYS_gettid) with
> pthread_self()
> > * stream-tcp-reassemble.h: replace u_int8_t with uint8_t
> > * util-daemon.c: include <signal.h>
> >
> >
> >
> > On 05/21/10 09:35 AM, Will Metcalf wrote:
> >> We don't currently have any Solaris boxes setup for testing, probably
> >> something we should look into ;-). Yao-Min, can you offer Lui any
> >> assistance?
> >>
> >> Regards,
> >>
> >> Will
> >>
> >> On Fri, May 21, 2010 at 11:29 AM, Lui Cat <luis.mlists at gmail.com>
> wrote:
> >>
> >>> hello there;
> >>>
> >>> don't know if this is the right forum to ask this question, but I was
> >>> wondering if anyone has attempted to compile suricata on solaris (sparc
> or
> >>> x86)..
> >>> ?
> >>>
> >>> I'm currently stuck at the following:
> >>>
> >>> bash-3.00$ make
> >>> make all-recursive
> >>> Making all in libhtp
> >>> make all-recursive
> >>> Making all in htp
> >>> Making all in test
> >>> Making all in src
> >>> gcc -DHAVE_CONFIG_H -I. -I.. -I../libhtp -I/opt/PP2K/include
> >>> -I/opt/PP2K/include -I/opt/PP2K/include -I/opt/PP2K/include
> >>> -mcpu=ultrasparc -W -Wall -fno-strict-aliasing -Wno-unused-parameter
> >>> -DOS_SOLARIS -DHAVE_LIBNET11 -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD
> >>> -DHAVE_NET_ETHERNET_H -DLIBPCAP_VERSION_MAJOR=1 -MT
> source-pcap-file.o -MD
> >>> -MP -MF .deps/source-pcap-file.Tpo -c -o source-pcap-file.o
> >>> source-pcap-file.c
> >>> source-pcap-file.c:51: error: syntax error before "u_int8_t"
> >>> source-pcap-file.c: In function `ReceivePcapFileThreadInit':
> >>> source-pcap-file.c:208: warning: assignment from incompatible pointer
> type
> >>> source-pcap-file.c:211: warning: assignment from incompatible pointer
> type
> >>> source-pcap-file.c:214: warning: assignment from incompatible pointer
> type
> >>> source-pcap-file.c:217: warning: assignment from incompatible pointer
> type
> >>> *** Error code 1
> >>> make: Fatal error: Command failed for target `source-pcap-file.o'
> >>> Current working directory
> >>> /export/home/lcatacor/src/suricata/suricata-0.9.0/src
> >>> *** Error code 1
> >>> The following command caused the error:
> >>> fail= failcom='exit 1'; \
> >>> for f in x $MAKEFLAGS; do \
> >>> case $f in \
> >>> *=* | --[!k]*);; \
> >>> *k*) failcom='fail=yes';; \
> >>> esac; \
> >>> done; \
> >>> dot_seen=no; \
> >>> target=`echo all-recursive | sed s/-recursive//`; \
> >>> list='libhtp src'; for subdir in $list; do \
> >>> echo "Making $target in $subdir"; \
> >>> if test "$subdir" = "."; then \
> >>> dot_seen=yes; \
> >>> local_target="$target-am"; \
> >>> else \
> >>> local_target="$target"; \
> >>> fi; \
> >>> (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
> >>> || eval $failcom; \
> >>> done; \
> >>> if test "$dot_seen" = "no"; then \
> >>> make "$target-am" || exit 1; \
> >>> fi; test -z "$fail"
> >>> make: Fatal error: Command failed for target `all-recursive'
> >>> Current working directory
> /export/home/lcatacor/src/suricata/suricata-0.9.0
> >>> *** Error code 1
> >>> make: Fatal error: Command failed for target `all'
> >>>
> >>>
> >>>
> >>> To get this far, had to change the configure script to add a *solaris*
> >>> section to include a -DOS_SOLARIS and change the src/util-byte.h file
> to
> >>> include sys/byteorder.h
> >>>
> >>>
> >>> Any help would be appreciated
> >>>
> >>>
> >>> Thanks
> >>>
> >>> Luis
> >>>
> >>>
> >>> _______________________________________________
> >>> Oisf-devel mailing list
> >>> Oisf-devel at openinfosecfoundation.org
> >>> http://lists.openinfosecfoundation.org/mailman/listinfo/oisf-devel
> >>>
> >>>
> >>>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Oisf-devel mailing list
> > Oisf-devel at openinfosecfoundation.org
> > http://lists.openinfosecfoundation.org/mailman/listinfo/oisf-devel
>
>
> - --
> - ---------------------------------------------
> Victor Julien
> http://www.inliniac.net/
> PGP: http://www.inliniac.net/victorjulien.asc
> - ---------------------------------------------
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkv3o9UACgkQiSMBBAuniMeJMACdH6GKI5vIU3JYemsFmc1oPtua
> 9sAAnimegiL8/nexsA82GN8qkJte/sFA
> =yzEV
> -----END PGP SIGNATURE-----
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openinfosecfoundation.org/pipermail/oisf-devel/attachments/20100524/e3e90af7/attachment.html
More information about the Oisf-devel
mailing list