[Oisf-devel] suricata on solaris?
Luis
luis.mlists at gmail.com
Tue May 25 19:45:31 UTC 2010
got a little bit farther that time..
now it the error is as follows (sigh)..
bash-3.00$ make
make all-recursive
Making all in libhtp
make all-recursive
Making all in htp
Making all in test
Making all in src
gcc -DHAVE_CONFIG_H -I. -I.. -I../libhtp -I/opt/PP2K/include
-I/opt/PP2K/include -I/opt/PP2K/include -I/opt/PP2K/include
-mcpu=ultrasparc -W -Wall -fno-strict-aliasing -Wno-unused-parameter
-DOS_SOLARIS -DHAVE_LIBNET11 -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD
-DHAVE_NET_ETHERNET_H -DLIBPCAP_VERSION_MAJOR=1 -MT tm-threads.o -MD -MP
-MF .deps/tm-threads.Tpo -c -o tm-threads.o tm-threads.c
tm-threads.c: In function `SetCPUAffinity':
tm-threads.c:657: error: `cpu_set_t' undeclared (first use in this function)
tm-threads.c:657: error: (Each undeclared identifier is reported only once
tm-threads.c:657: error: for each function it appears in.)
tm-threads.c:657: error: syntax error before "cs"
tm-threads.c:659: warning: implicit declaration of function `CPU_ZERO'
tm-threads.c:659: error: `cs' undeclared (first use in this function)
tm-threads.c:660: warning: implicit declaration of function `CPU_SET'
tm-threads.c:672: error: too few arguments to function `processor_bind'
*** Error code 1
make: Fatal error: Command failed for target `tm-threads.o'
Current working directory
/export/home/lcatacor/src/suricata/suricata-0.9.0/src
*** Error code 1
The following command caused the error:
fail= failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='libhtp src'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /export/home/lcatacor/src/suricata/suricata-0.9.0
*** Error code 1
make: Fatal error: Command failed for target `all'
Luis
On Tue, May 25, 2010 at 8:51 AM, Will Metcalf <william.metcalf at gmail.com>wrote:
> in src/threads.h change the macro around to look like this. See if it
> works after that.
>
> Regards,
>
> Will
>
> /*
> * OS specific macro's for setting the thread name. "top" can display
> * this name.
> */
> #ifndef PR_SET_NAME /*PR_SET_NAME */
> #define SCSetThreadName(n)
> #elif OS_FREEBSD /* FreeBSD */
> /** \todo Add implementation for FreeBSD */
> #define SCSetThreadName(n)
> #elif OS_WIN32 /* Windows */
> /** \todo Add implementation for Windows */
> #define SCSetThreadName(n)
> #elif OS_DARWIN /* Mac OS X */
> /** \todo Add implementation for MacOS */
> #define SCSetThreadName(n)
> #elif OS_SOLARIS
> #define SCSetThreadName(n)
> #else /* Linux */
>
>
> On Mon, May 24, 2010 at 10:48 AM, Luis <luis.mlists at gmail.com> wrote:
> > Hi:
> >
> > Thanks for answering..
> >
> > made the modifications to configure.in, and the mentioned source files..
> > (using DOS_SOLARIS)
> >
> >
> > however, I'm running into the following now..
> >
> > bash-3.00$ make
> > make all-recursive
> > Making all in libhtp
> > make all-recursive
> > Making all in htp
> > Making all in test
> > Making all in src
> > gcc -DHAVE_CONFIG_H -I. -I.. -I../libhtp -I/opt/PP2K/include
> > -I/opt/PP2K/include -I/opt/PP2K/include -I/opt/PP2K/include
> > -mcpu=ultrasparc -W -Wall -fno-strict-aliasing -Wno-unused-parameter
> > -DOS_SOLARIS -DHAVE_LIBNET11 -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD
> > -DHAVE_NET_ETHERNET_H -DLIBPCAP_VERSION_MAJOR=1 -MT flow.o -MD -MP -MF
> > .deps/flow.Tpo -c -o flow.o flow.c
> > flow.c: In function `FlowManagerThread':
> > flow.c:666: error: `THREAD_NAME_LEN' undeclared (first use in this
> function)
> > flow.c:666: error: (Each undeclared identifier is reported only once
> > flow.c:666: error: for each function it appears in.)
> > flow.c:666: warning: implicit declaration of function `prctl'
> > flow.c:666: error: `PR_SET_NAME' undeclared (first use in this function)
> > flow.c:666: warning: unused variable `tname'
> > *** Error code 1
> > make: Fatal error: Command failed for target `flow.o'
> > Current working directory
> > /export/home/lcatacor/src/suricata/suricata-0.9.0/src
> > *** Error code 1
> > The following command caused the error:
> > fail= failcom='exit 1'; \
> > for f in x $MAKEFLAGS; do \
> > case $f in \
> > *=* | --[!k]*);; \
> > *k*) failcom='fail=yes';; \
> > esac; \
> > done; \
> > dot_seen=no; \
> > target=`echo all-recursive | sed s/-recursive//`; \
> > list='libhtp src'; for subdir in $list; do \
> > echo "Making $target in $subdir"; \
> > if test "$subdir" = "."; then \
> > dot_seen=yes; \
> > local_target="$target-am"; \
> > else \
> > local_target="$target"; \
> > fi; \
> > (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
> > || eval $failcom; \
> > done; \
> > if test "$dot_seen" = "no"; then \
> > make "$target-am" || exit 1; \
> > fi; test -z "$fail"
> > make: Fatal error: Command failed for target `all-recursive'
> > Current working directory
> /export/home/lcatacor/src/suricata/suricata-0.9.0
> > *** Error code 1
> > make: Fatal error: Command failed for target `all'
> >
> >
> >
> >
> > did I miss something?
> >
> >
> > Thanks
> >
> >
> > Luis
> >
> >
> >
> >
> > On Sat, May 22, 2010 at 5:28 AM, Victor Julien <victor at inliniac.net>
> wrote:
> >>
> >> -----BEGIN PGP SIGNED MESSAGE-----
> >> Hash: SHA1
> >>
> >> Thank you Yoa-Min. One remark: in recent Suricata libnet is no longer
> >> required.
> >>
> >> Cheers,
> >> Victor
> >>
> >> Yao-Min Chen wrote:
> >> > The following info is dated back in Feb. So perhaps it is outdated.
> The
> >> > work was based on Solaris 10, but should also work with OpenSolaris.
> >> > Feel free to let me know any question.
> >> >
> >> >
> >> > LIBNET
> >> >
> >> > * Suricata requires libnet-1.1.x.so; the package available at
> >> > www.sunfreeware.com has libnet.a only.
> >> > * Instead, download libnet tarball from www.sunfreeware.com
> >> > * /usr/sfw/bin/gtar xzf libnet-1.1.2.1.tar.gz
> >> > * Get the patch files from D.Mehra's OpenSolaris package and build
> >> >
> >> > wget
> >> >
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/libnet_link_dlpi.c.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/libnet_link_dlpi.c.patch>
> >> > wget
> >> >
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.am.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.am.patch>
> >> > wget
> >> >
> http://cr.opensolaris.org/~dmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.in.patch<http://cr.opensolaris.org/%7Edmehra/libnet/raw_files/new/usr/src/lib/libnet/makefile.in.patch>
> >> > patch -b -d src libnet_link_dlpi.c < libnet_link_dlpi.c.patch
> >> > patch -b -d src Makefile.am < makefile.am.patch
> >> > patch -b -p1 -d src Makefile.in < makefile.in.patch
> >> >
> >> > export CFLAGS="-g -fPIC"
> >> > export PATH=/opt/gccfss/bin:$PATH
> >> > ./configure
> >> > gmake
> >> > gmake install
> >> >
> >> >
> >> > Modify configure.in and configure to add a new OS label SUNOS
> >> >
> >> > case "$host" in
> >> > *-*-*freebsd*)
> >> > CFLAGS="${CFLAGS} -DOS_FREEBSD"
> >> > CPPFLAGS="${CPPFLAGS} -I/usr/local/include
> >> > -I/usr/local/include/libnet11"
> >> > LDFLAGS="${LDFLAGS} -L/usr/local/lib
> >> > -L/usr/local/lib/libnet11"
> >> > ;;
> >> > *darwin*|*Darwin*)
> >> > CFLAGS="${CFLAGS} -DOS_DARWIN"
> >> > CPPFLAGS="${CPPFLAGS} -I/opt/local/include"
> >> > LDFLAGS="${LDFLAGS} -L/opt/local/lib"
> >> > ;;
> >> > *SunOS*)
> >> > CFLAGS="${CFLAGS} -DOS_SUNOS"
> >> > CPPLAGS="${CPPFLAGS} -I/usr/sfw/include"
> >> > LDFLAGS="${LDFLAGS} -L/usr/sfw/lib"
> >> > ;;
> >> > *-*-linux*)
> >> > #for now do nothing
> >> > ;;
> >> > *)
> >> >
> >> >
> >> > Modify src
> >> >
> >> > * cd ./src
> >> > * source-pcap-file.c: replace u_int8_t with uint8_t as u_int8_t is
> >> > only defined in linux kernel header file, not POSIX standard
> >> > * util-debug.c: #define LOG_AUTHPRIV to LOG_AUTH and LOG_FTP to
> >> > LOG_DAEMON since there is neither LOG_AUTHPRIV nor LOG_FTP in
> >> > Solaris
> >> > * stream-tcp.c: same as previous item, replace u_int8_t with
> uint8_t
> >> > as u_int8_t
> >> > * suricata-common.h: include <strings.h> to pick up definition of
> >> > index()
> >> > * tm-threads.c: replace syscall(SYS_gettid) with pthread_self();
> >> > replace sched_setaffinity() with processor_bind()
> >> > * util-debug.c: replace syscall(SYS_gettid) with pthread_self()
> >> > * util-debug-filters.c: replace syscall(SYS_gettid) with
> >> > pthread_self()
> >> > * stream-tcp-reassemble.h: replace u_int8_t with uint8_t
> >> > * util-daemon.c: include <signal.h>
> >> >
> >> >
> >> >
> >> > On 05/21/10 09:35 AM, Will Metcalf wrote:
> >> >> We don't currently have any Solaris boxes setup for testing, probably
> >> >> something we should look into ;-). Yao-Min, can you offer Lui any
> >> >> assistance?
> >> >>
> >> >> Regards,
> >> >>
> >> >> Will
> >> >>
> >> >> On Fri, May 21, 2010 at 11:29 AM, Lui Cat <luis.mlists at gmail.com>
> >> >> wrote:
> >> >>
> >> >>> hello there;
> >> >>>
> >> >>> don't know if this is the right forum to ask this question, but I
> was
> >> >>> wondering if anyone has attempted to compile suricata on solaris
> >> >>> (sparc or
> >> >>> x86)..
> >> >>> ?
> >> >>>
> >> >>> I'm currently stuck at the following:
> >> >>>
> >> >>> bash-3.00$ make
> >> >>> make all-recursive
> >> >>> Making all in libhtp
> >> >>> make all-recursive
> >> >>> Making all in htp
> >> >>> Making all in test
> >> >>> Making all in src
> >> >>> gcc -DHAVE_CONFIG_H -I. -I.. -I../libhtp -I/opt/PP2K/include
> >> >>> -I/opt/PP2K/include -I/opt/PP2K/include -I/opt/PP2K/include
> >> >>> -mcpu=ultrasparc -W -Wall -fno-strict-aliasing -Wno-unused-parameter
> >> >>> -DOS_SOLARIS -DHAVE_LIBNET11 -D_BSD_SOURCE -D__BSD_SOURCE
> >> >>> -D__FAVOR_BSD
> >> >>> -DHAVE_NET_ETHERNET_H -DLIBPCAP_VERSION_MAJOR=1 -MT
> >> >>> source-pcap-file.o -MD
> >> >>> -MP -MF .deps/source-pcap-file.Tpo -c -o source-pcap-file.o
> >> >>> source-pcap-file.c
> >> >>> source-pcap-file.c:51: error: syntax error before "u_int8_t"
> >> >>> source-pcap-file.c: In function `ReceivePcapFileThreadInit':
> >> >>> source-pcap-file.c:208: warning: assignment from incompatible
> pointer
> >> >>> type
> >> >>> source-pcap-file.c:211: warning: assignment from incompatible
> pointer
> >> >>> type
> >> >>> source-pcap-file.c:214: warning: assignment from incompatible
> pointer
> >> >>> type
> >> >>> source-pcap-file.c:217: warning: assignment from incompatible
> pointer
> >> >>> type
> >> >>> *** Error code 1
> >> >>> make: Fatal error: Command failed for target `source-pcap-file.o'
> >> >>> Current working directory
> >> >>> /export/home/lcatacor/src/suricata/suricata-0.9.0/src
> >> >>> *** Error code 1
> >> >>> The following command caused the error:
> >> >>> fail= failcom='exit 1'; \
> >> >>> for f in x $MAKEFLAGS; do \
> >> >>> case $f in \
> >> >>> *=* | --[!k]*);; \
> >> >>> *k*) failcom='fail=yes';; \
> >> >>> esac; \
> >> >>> done; \
> >> >>> dot_seen=no; \
> >> >>> target=`echo all-recursive | sed s/-recursive//`; \
> >> >>> list='libhtp src'; for subdir in $list; do \
> >> >>> echo "Making $target in $subdir"; \
> >> >>> if test "$subdir" = "."; then \
> >> >>> dot_seen=yes; \
> >> >>> local_target="$target-am"; \
> >> >>> else \
> >> >>> local_target="$target"; \
> >> >>> fi; \
> >> >>> (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target)
> \
> >> >>> || eval $failcom; \
> >> >>> done; \
> >> >>> if test "$dot_seen" = "no"; then \
> >> >>> make "$target-am" || exit 1; \
> >> >>> fi; test -z "$fail"
> >> >>> make: Fatal error: Command failed for target `all-recursive'
> >> >>> Current working directory
> >> >>> /export/home/lcatacor/src/suricata/suricata-0.9.0
> >> >>> *** Error code 1
> >> >>> make: Fatal error: Command failed for target `all'
> >> >>>
> >> >>>
> >> >>>
> >> >>> To get this far, had to change the configure script to add a
> *solaris*
> >> >>> section to include a -DOS_SOLARIS and change the src/util-byte.h
> file
> >> >>> to
> >> >>> include sys/byteorder.h
> >> >>>
> >> >>>
> >> >>> Any help would be appreciated
> >> >>>
> >> >>>
> >> >>> Thanks
> >> >>>
> >> >>> Luis
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> Oisf-devel mailing list
> >> >>> Oisf-devel at openinfosecfoundation.org
> >> >>> http://lists.openinfosecfoundation.org/mailman/listinfo/oisf-devel
> >> >>>
> >> >>>
> >> >>>
> >> >
> >> >
> >> >
> ------------------------------------------------------------------------
> >> >
> >> > _______________________________________________
> >> > Oisf-devel mailing list
> >> > Oisf-devel at openinfosecfoundation.org
> >> > http://lists.openinfosecfoundation.org/mailman/listinfo/oisf-devel
> >>
> >>
> >> - --
> >> - ---------------------------------------------
> >> Victor Julien
> >> http://www.inliniac.net/
> >> PGP: http://www.inliniac.net/victorjulien.asc
> >> - ---------------------------------------------
> >>
> >> -----BEGIN PGP SIGNATURE-----
> >> Version: GnuPG v1.4.9 (GNU/Linux)
> >> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> >>
> >> iEYEARECAAYFAkv3o9UACgkQiSMBBAuniMeJMACdH6GKI5vIU3JYemsFmc1oPtua
> >> 9sAAnimegiL8/nexsA82GN8qkJte/sFA
> >> =yzEV
> >> -----END PGP SIGNATURE-----
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openinfosecfoundation.org/pipermail/oisf-devel/attachments/20100525/927b3eb5/attachment-0002.html>
More information about the Oisf-devel
mailing list