[Oisf-users] Compliling

[Anas.B]

Hi Will,
So all what i have to do is : to add this line ==> /usr/local/lib
in the file =>  /etc/ld.so.conf
whitout anything ??
no "include" ? nothing ?

I didn't understand !!    I try it but same problem !! :s

Maybe I have a problem of permissions !?
Even "make clean" do not success !!* :*

*root at admin-server
:/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0#* make clean
Making clean in src
make[1]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
 rm -f suricata
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[1]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
Making clean in libhtp
make[1]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
Making clean in test
make[2]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
 rm -f main
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
Making clean in htp
make[2]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
test -z "libhtp.la" || rm -f libhtp.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
Making clean in .
make[2]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
make[1]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
Making clean in .
make[1]: Entering directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
rm -rf .libs _libs
rm -f *.lo
make[1]: Leaving directory
`/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
*root at admin-server:/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0#
*


Thank you,
A..



yer
2010/7/19 Will Metcalf <william.metcalf at gmail.com>

> You may have to do as the output instructs i.e. adding /usr/local/lib
> to /etc/ld.so.conf and after doing so running ldconfig.
>
> Regards,
>
> Will
>
> On Fri, Jul 16, 2010 at 11:12 AM, Anas.B <a.bouhsaina at gmail.com> wrote:
> > Hello evrybody,
> >
> > I'v tried to reinstall Suricata ,
> >
> > #chmod +x configure
> >
> > root at admin-server
> :/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0#
> > apt-get install libpcre3 libpcre3-dbg libpcre3-dev libyaml-dev
> libyaml-dev
> > zlib1g-dev libnfnetlink-dev libnfnetlink0 libnetfilter-queue1
> > libnetfilter-queue-dev libnet1-dev libcap-ng-dev libcap-ng0
> build-essential
> > autoconf automake libtool libpcap-dev
> >
> > this is the configure command :
> >
> > #./configure --enable-nfqueue
> >
> >
> > but after #make and make install
> >
> >
> >
> > It seems that there are problems !!!!
> > that's the results !!!
> > ........................
> > ................................
> > g.o alert-debuglog.o alert-prelude.o alert-unified-log.o
> > alert-unified-alert.o alert-unified2-alert.o log-httplog.o stream.o
> > stream-tcp.o stream-tcp-reassemble.o respond-reject.o
> > respond-reject-libnet11.o conf.o conf-yaml-loader.o counters.o
> app-layer.o
> > app-layer-detect-proto.o app-layer-parser.o app-layer-htp.o
> app-layer-tls.o
> > app-layer-smb.o app-layer-smb2.o app-layer-dcerpc.o
> app-layer-dcerpc-udp.o
> > app-layer-ftp.o app-layer-ssl.o defrag.o output.o win32-misc.o
> > win32-service.o util-action.o util-profiling.o cuda-packet-batcher.o
> > ../libhtp/htp/.libs/libhtp.so /usr/lib/libcap-ng.so -lpcap
> > /usr/lib/libnet.so -lnetfilter_queue -lnfnetlink -lpthread
> > /usr/lib/libyaml.so -lpcre
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > make[2]: Nothing to be done for `all-am'.
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > make[1]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > root at admin-server
> :/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0#
> > make install
> > Making install in libhtp
> > make[1]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > Making install in htp
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
> > make[3]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
> > test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib"
> >  /bin/bash ../libtool   --mode=install /usr/bin/install -c   libhtp.la
> > '/usr/local/lib'
> > libtool: install: /usr/bin/install -c .libs/libhtp-0.2.so.1.0.2
> > /usr/local/lib/libhtp-0.2.so.1.0.2
> > libtool: install: (cd /usr/local/lib && { ln -s -f libhtp-0.2.so.1.0.2
> > libhtp-0.2.so.1 || { rm -f libhtp-0.2.so.1 && ln -s libhtp-0.2.so.1.0.2
> > libhtp-0.2.so.1; }; })
> > libtool: install: (cd /usr/local/lib && { ln -s -f libhtp-0.2.so.1.0.2
> > libhtp.so || { rm -f libhtp.so && ln -s libhtp-0.2.so.1.0.2 libhtp.so; };
> })
> > libtool: install: /usr/bin/install -c .libs/libhtp.lai
> > /usr/local/lib/libhtp.la
> > libtool: install: /usr/bin/install -c .libs/libhtp.a
> /usr/local/lib/libhtp.a
> > libtool: install: chmod 644 /usr/local/lib/libhtp.a
> > libtool: install: ranlib /usr/local/lib/libhtp.a
> > libtool: finish:
> > PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin"
> > ldconfig -n /usr/local/lib
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/local/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use the `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - add LIBDIR to the `LD_RUN_PATH' environment variable
> >      during linking
> >    - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> >    - have your system administrator add LIBDIR to `/etc/ld.so.conf'
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > test -z "/usr/local/include/htp" || /bin/mkdir -p
> "/usr/local/include/htp"
> >  /usr/bin/install -c -m 644 bstr.h dslib.h hooks.h htp.h utf8_decoder.h
> > htp_decompressors.h '/usr/local/include/htp'
> > make[3]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/htp'
> > Making install in test
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
> > make[3]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
> > make[3]: Nothing to be done for `install-exec-am'.
> > make[3]: Nothing to be done for `install-data-am'.
> > make[3]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp/test'
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > make[3]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > make[3]: Nothing to be done for `install-exec-am'.
> > test -z "/usr/local/lib/pkgconfig" || /bin/mkdir -p
> > "/usr/local/lib/pkgconfig"
> >  /usr/bin/install -c -m 644 htp.pc '/usr/local/lib/pkgconfig'
> > make[3]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > make[1]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/libhtp'
> > Making install in src
> > make[1]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
> > test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
> >   /bin/bash ../libtool   --mode=install /usr/bin/install -c suricata
> > '/usr/local/bin'
> > libtool: install: /usr/bin/install -c .libs/suricata
> /usr/local/bin/suricata
> > make[2]: Nothing to be done for `install-data-am'.
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
> > make[1]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0/src'
> > make[1]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > make[2]: Entering directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > make[2]: Nothing to be done for `install-exec-am'.
> > make[2]: Nothing to be done for `install-data-am'.
> > make[2]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > make[1]: Leaving directory
> > `/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0'
> > root at admin-server
> :/home/anas/Desktop/Prerequis/suricata-1.0.0/suricata-1.0.0#
> >
> > I do not know if this will pose problems
> >
> > What do you thik ??
> > is it normal !!!
> >
> > Best regards,
> > A..
> >
> > _______________________________________________
> > Oisf-users mailing list
> > Oisf-users at openinfosecfoundation.org
> > http://lists.openinfosecfoundation.org/mailman/listinfo/oisf-users
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openinfosecfoundation.org/pipermail/oisf-users/attachments/20100720/291c7bcb/attachment-0002.html>