[Oisf-users] suricata vlan log - onionsecurity is ok, selks ko

john nesh john.nesh76 at gmail.com
Fri Feb 27 14:40:33 UTC 2015


Seems not:
grep vlan stats.log | tail -10
decoder.vlan              | AFPacketeth11             | 0
decoder.vlan_qinq         | AFPacketeth11             | 0
decoder.vlan              | AFPacketeth01             | 0
decoder.vlan_qinq         | AFPacketeth01             | 0
decoder.vlan              | AFPacketeth11             | 0
decoder.vlan_qinq         | AFPacketeth11             | 0
decoder.vlan              | AFPacketeth01             | 0
decoder.vlan_qinq         | AFPacketeth01             | 0
decoder.vlan              | AFPacketeth11             | 0
decoder.vlan_qinq         | AFPacketeth11             | 0

and:
suricata --dump-counters | grep vlan
suricata: unrecognized option '--dump-counters'

in tcpdump I do see:
802.1q Virtual LAN, PRI:0, CFI: 0, ID: 503
802.1q Virtual LAN, PRI:0, CFI: 0, ID: 241

I do see:
ethtool -k eth1
Features for eth1:
rx-checksumming: off
tx-checksumming: off
        tx-checksum-ipv4: off
        tx-checksum-unneeded: off [fixed]
        tx-checksum-ip-generic: off [fixed]
        tx-checksum-ipv6: off
        tx-checksum-fcoe-crc: off [fixed]
        tx-checksum-sctp: off [fixed]
scatter-gather: off
        tx-scatter-gather: off
        tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: off
        tx-tcp-segmentation: off
        tx-tcp-ecn-segmentation: off
        tx-tcp6-segmentation: off
udp-fragmentation-offload: off [fixed]
generic-segmentation-offload: off
generic-receive-offload: off
large-receive-offload: off [fixed]
rx-vlan-offload: off
tx-vlan-offload: off
ntuple-filters: off [fixed]
receive-hashing: off [fixed]
highdma: on
rx-vlan-filter: off [fixed]
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
fcoe-mtu: off [fixed]
tx-nocache-copy: on
loopback: off [fixed]

In suricata.yaml:
vlan:
  use-for-tracking: true


2015-02-27 10:46 GMT+01:00 Peter Manev <petermanev at gmail.com>:

> On Fri, Feb 27, 2015 at 9:11 AM, john nesh <john.nesh76 at gmail.com> wrote:
> > Nope, I think that this is the issue.
> > What could I share in order to get troubleshooting faster?
>
> Can you try to see(just to confirm) if there are any vlan counters in
> the stats.log (something like..)
> grep vlan stats.log | tail -10
>
> Then could you do
> suricata --dump-counters |grep vlan
>
>
> Thanks
>
> >
> > 2015-02-26 23:37 GMT+01:00 Peter Manev <petermanev at gmail.com>:
> >>
> >> On Thu, Feb 26, 2015 at 10:51 PM, john nesh <john.nesh76 at gmail.com>
> wrote:
> >> > Seems not working also in this way.
> >> > Is there anything else I could check?
> >>
> >> Do you have vlan IDs in eve.json ?
> >>
> >> >
> >> > 2015-02-26 21:53 GMT+01:00 Peter Manev <petermanev at gmail.com>:
> >> >>
> >> >> On Thu, Feb 26, 2015 at 9:43 PM, john nesh <john.nesh76 at gmail.com>
> >> >> wrote:
> >> >> > You are right,
> >> >> >
> >> >> > rx-vlan-offload: on
> >> >> > tx-vlan-offload: on
> >> >> >
> >> >> > Do I have to disable it?
> >> >>
> >> >> Just run that -
> >> >> /opt/selks/Scripts/Setup/reconfigure-listening-interface_stamus.sh
> >> >>
> >> >>
> >> >>
> >> >> >
> >> >> > 2015-02-26 21:04 GMT+01:00 Peter Manev <petermanev at gmail.com>:
> >> >> >>
> >> >> >> On Thu, Feb 26, 2015 at 8:18 PM, john nesh <john.nesh76 at gmail.com
> >
> >> >> >> wrote:
> >> >> >> > Hi,
> >> >> >> >
> >> >> >> > I am facing a different behaviour regarding vlans in logs.
> >> >> >> > I made an installation of securityonion and vlan worked log in
> >> >> >> > eve.json
> >> >> >> > worked flawlessy but not in selks.
> >> >> >> > I have read that vlan behaviour had changed in 2.1
> >> >> >> >
> >> >> >> > in my suricata.yaml I have:
> >> >> >> >
> >> >> >> >  vlan:
> >> >> >> >    use-for-tracking: true
> >> >> >> >
> >> >> >> > But I have no log in eve.json.
> >> >> >> > Is this an expected behaviour?
> >> >> >>
> >> >> >> You might have vlan offloading enabled on your NIC - if that is
> the
> >> >> >> case you would need to disable it.
> >> >> >> (ethtool -k interface - will show the status)
> >> >> >>
> >> >> >> >
> >> >> >> > John
> >> >> >> >
> >> >> >> > _______________________________________________
> >> >> >> > Suricata IDS Users mailing list:
> >> >> >> > oisf-users at openinfosecfoundation.org
> >> >> >> > Site: http://suricata-ids.org | Support:
> >> >> >> > http://suricata-ids.org/support/
> >> >> >> > List:
> >> >> >> >
> >> >> >> >
> https://lists.openinfosecfoundation.org/mailman/listinfo/oisf-users
> >> >> >> > Training now available: http://suricata-ids.org/training/
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --
> >> >> >> Regards,
> >> >> >> Peter Manev
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Regards,
> >> >> Peter Manev
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Regards,
> >> Peter Manev
> >
> >
>
>
>
> --
> Regards,
> Peter Manev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openinfosecfoundation.org/pipermail/oisf-users/attachments/20150227/642ce1e6/attachment-0002.html>


More information about the Oisf-users mailing list