[Oisf-users] Problem when testing Suricata on an ARMv7 based board

Anoop Saldanha anoopsaldanha at gmail.com
Tue Nov 10 07:29:48 UTC 2015

On Mon, Nov 9, 2015 at 11:06 PM, Peter Manev <petermanev at gmail.com> wrote:
> On Mon, Nov 9, 2015 at 3:00 PM, Mahdi Aichouch <foxmehdi at gmail.com> wrote:
>> Hello,
>> I am trying to run Suricata on an ARMv7 architecture based board.
>> After, I had successfully cross-compiled  Suricata for my target, I tried to
>> run Suricata on the board but I got an Aborted fault.
>> Below is the command that I used in my test:
>> $> ./home/suricata/bin/suricata -c /etc/suricata/suricata.yaml -i eth0
>> --init-errors-fatal
> Can you try adding the "-v" switch for more verbose output -
> ./home/suricata/bin/suricata -c /etc/suricata/suricata.yaml -i eth0
> --init-errors-fatal -v
>> [35] 1/1/1970 -- 00:02:03 - (suricata.c:1073) <Notice> (SCPrintVersion) --
>> This is Suricata version 2.1dev (rev 86711a1)
>> Aborted.
>> No further message are printed on the terminal.
>> Could someone help me in figuring out what causes this issue.

Trouble with some instructions generated for your architecture most
likely.  I would first try and make sure that I have cross compiled
directly, and then zero in on the instructions generated by the
compiler and make sure it is present ARMv7's ISA.

Anoop Saldanha

More information about the Oisf-users mailing list