[Oisf-users] problem with af-packet in 3.1.2
Michael Stone
mstone at mathom.us
Tue Oct 4 13:15:38 UTC 2016
On Mon, Oct 03, 2016 at 10:22:32AM +0200, Peter Manev wrote:
>Can you share your ethtool stats (ethtool ethX -S ) and your i210
>ethtool offloading settings - (ethtool -k ethX)?
>Do you run any specific set up scripts(and/or drivers) for i210?
NIC statistics:
rx_packets: 9394
tx_packets: 0
rx_bytes: 6535081
tx_bytes: 0
rx_broadcast: 65
tx_broadcast: 0
rx_multicast: 65
tx_multicast: 0
multicast: 65
collisions: 0
rx_crc_errors: 0
rx_no_buffer_count: 0
rx_missed_errors: 0
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_window_errors: 0
tx_abort_late_coll: 0
tx_deferred_ok: 0
tx_single_coll_ok: 0
tx_multi_coll_ok: 0
tx_timeout_count: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
rx_align_errors: 0
tx_tcp_seg_good: 0
tx_tcp_seg_failed: 0
rx_flow_control_xon: 0
rx_flow_control_xoff: 0
tx_flow_control_xon: 0
tx_flow_control_xoff: 0
rx_long_byte_count: 6535081
tx_dma_out_of_sync: 0
tx_smbus: 0
rx_smbus: 0
dropped_smbus: 0
os2bmc_rx_by_bmc: 0
os2bmc_tx_by_bmc: 0
os2bmc_tx_by_host: 0
os2bmc_rx_by_host: 0
tx_hwtstamp_timeouts: 0
rx_hwtstamp_cleared: 0
rx_errors: 0
tx_errors: 0
tx_dropped: 0
rx_length_errors: 0
rx_over_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
tx_queue_0_packets: 0
tx_queue_0_bytes: 0
tx_queue_0_restart: 0
tx_queue_1_packets: 0
tx_queue_1_bytes: 0
tx_queue_1_restart: 0
tx_queue_2_packets: 0
tx_queue_2_bytes: 0
tx_queue_2_restart: 0
tx_queue_3_packets: 0
tx_queue_3_bytes: 0
tx_queue_3_restart: 0
rx_queue_0_packets: 354
rx_queue_0_bytes: 53541
rx_queue_0_drops: 0
rx_queue_0_csum_err: 0
rx_queue_0_alloc_failed: 0
rx_queue_1_packets: 5308
rx_queue_1_bytes: 5989263
rx_queue_1_drops: 0
rx_queue_1_csum_err: 0
rx_queue_1_alloc_failed: 0
rx_queue_2_packets: 3358
rx_queue_2_bytes: 402887
rx_queue_2_drops: 0
rx_queue_2_csum_err: 0
rx_queue_2_alloc_failed: 0
rx_queue_3_packets: 374
rx_queue_3_bytes: 51814
rx_queue_3_drops: 0
rx_queue_3_csum_err: 0
rx_queue_3_alloc_failed: 0
rx-checksumming: off
tx-checksumming: on
tx-checksum-ipv4: off [fixed]
tx-checksum-ip-generic: on
tx-checksum-ipv6: off [fixed]
tx-checksum-fcoe-crc: off [fixed]
tx-checksum-sctp: on
scatter-gather: off
tx-scatter-gather: off
tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: off
tx-tcp-segmentation: off
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: off
tx-tcp6-segmentation: off
udp-fragmentation-offload: off [fixed]
generic-segmentation-offload: off
generic-receive-offload: off
large-receive-offload: off [fixed]
rx-vlan-offload: off
tx-vlan-offload: off [requested on]
ntuple-filters: off
receive-hashing: on
highdma: on [fixed]
rx-vlan-filter: on [fixed]
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
tx-gre-segmentation: on
tx-gre-csum-segmentation: on
tx-ipxip4-segmentation: on
tx-ipxip6-segmentation: on
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-gso-partial: on
fcoe-mtu: off [fixed]
tx-nocache-copy: off
loopback: off [fixed]
rx-fcs: off [fixed]
rx-all: off
tx-vlan-stag-hw-insert: off [fixed]
rx-vlan-stag-hw-parse: off [fixed]
rx-vlan-stag-filter: off [fixed]
l2-fwd-offload: off [fixed]
busy-poll: off [fixed]
hw-tc-offload: off [fixed]
Driver is stock. I've tried with and without rxhash.
>Is there a possibility for you to share your suricata.yaml and
>suricata.log (privately if you would like)?- for the troubled run.
I've tried both my usual config and the one that comes with the source,
same results.
Mike Stone
More information about the Oisf-users
mailing list